Toyota Supra P Type 1982 7M-GTE

Description

I'm the 3rd owner of this car and bought it for $1000 in 2007 as my first car. Blew the original 5mge shortly after and started my 7M swap. After years and years of building and fixing parts as I break them and upgrading said broken parts I've come quite a long way! Shortly after I swapped in my 7M (after it was stabbed by a forklift upon shipping) I melted a piston and did a full rebuild after a little bore due to scoring on the cylinder walls. With a Cometic head gasket and ARP head studs the sky was now the limit! Since then I've been slowly adding mods and more power to the car and it runs amazing thanks to the Brewed Motorsports Tune on the AEM Infinity!

Additional details

Make
Toyota
Model
Supra
Year
1982
Sub Model
P Type
Milage
60000
Number of owners
3
Location
Missoula, Montana, USA

Front tire size
225/50/16
Rear tire size
245/45/16
Front wheel size
16x8 +0
Rear wheel size
16x8 -25
HP rating
400
Fuel type
Petrol
Weight
2800Lbs

Engine code
7M-GTE
Transmission type
Standard
Transmission speed
5
Transmission
R154
Driven wheels
RWD

Exterior color
Black with gold flake
Interior color
Terracotta

  • Front Facing Intake Manifold
  • 57 Trim CT-26 with Billet Compressor wheel
  • ID1000 Injector Dynamic Injectors
  • 350Z (Non-uprev) Throttle Body
  • Aem Intake air temp (30-2014 DTM)
  • Aem Map sensor (30-2130-50)
  • Velocity Elements Wideband Knock Sensor Kit
  • Mac 3 port boost controller
  • Aem Infinity 508 (30-7108)
  • Aem 4.2 Wideband sensor (30-2001)
  • Aem Oil pressure sensor (30-2131-150)
  • Aem Fuel pressure sensor (30-2131-150)
  • Aem Coolant temp sensor (30-2012)
  • Fidanza Cam Gears
  • Fornari Racing Crank and Cam Trigger Kit and OEM CPS Delete Kit
  • ATi Damper
  • Clutch Masters FX400 (16063-HDCL)
  • Dana 1310 Trans Input shaft
  • 1 Piece Driveshaft with MK3 Adapter to Diff
  • TruTrac LSD with solid crush sleeve 3.73 Gear ratio
  • BillyM Shiftgasm Shifter bushing kit
  • Aem CD7 Dash with Track Mapping and Vehicle Dynamics Module (30-5701+30-2206)
  • Aem X-Series Can Bus gauge (30-0312)
  • Rear Camber Bracket Mod (Welded in)
  • Powder Coated Diff and Trans
  • DIY Front Coilovers with 400LB springs
  • 350LB Lowering springs
  • MR2 front struts with extended gland nut
  • Iroc Camaro rear struts
  • Addaco Sway bars
  • New Poly bushings throughout whole car
  • T3 Fully adjustable front lower control arms
  • T3 camber plates
  • T3 steering arms
  • Ceika BBK with 6 pot front's 4 pot rears with integrated hydro
  • Honda Civic Accelerator pedal
  • 32x12x4 Front mount intercooler
  • CX Racing Aluminum Radiator with dual fan shroud kit
  • Full custom tucked race engine harness
  • .5mm oversized pistons
  • Cometic head gasket
  • ARP Head studs
  • ARP Connecting rod bolts
  • Shop by Category

    Made with ffrides.com